How can I stay connected with PABCO® Roofing Products updates and news?

Stay connected by visiting our site regularly and checking our news page for recent product releases and updates.

On Facebook? So are we. Follow us for frequent tips, announcements, and other news. We’re also on LinkedIn, Instagram, Pinterest, YouTube, and Google+.

Where can I find a contractor in my area?

Refer to the Find A Contractor page on our website where we’ll connect you with a local PABCO® Preferred Contractor.

How do I decide what roofing product is best for my house?

A great place to start looking is the Homeowners page where we have helpful information tailored for homeowners.

You can also visit our Compare Products page where you can compare our products and their features.

Our Territory Managers are also here to help guide you through choosing the best asphalt shingle for your home. Contact us online or give us a call (253-272-0374) and we’ll connect you with your local Territory Representative.

What does roof slope mean and why is it important?

Roof slope is generally expressed in the form of vertical rise:horizontal run. As an example, a roof could rise 5 inches for each 12 inches of horizontal distance. This would be a roof with a slope of 5:12.

Roof slope is important because the slope dictates how the roof is applied. The standard application practices detailed in the PABCO® Installation Instructions are intended for roofs with a slope between 4:12 and 20:12. Special application practices (also found in the PABCO® Directions For Application) are used if the slope is lower or steeper.

Do not use PABCO® shingles if the slope is less than 2:12. See the PABCO® Installation Instructions for additional details and related information.

Where can I find application instructions for the product I’ve chosen?

Visit our Literature page to view all out documents, or go to the Directions for Application section to get our product specific directions for application.

Can I use PABCO® shingles on a low-slope roof?

PABCO® shingles can be applied on slopes as low as 2:12.

For slopes between 2:12 and 4:12, specific low-slope application practices are needed. For slopes between 2:12 and 4:12, the building code calls for covering the deck with an approved underlayment applied with an overlap 1” greater than half the width of the sheet.

As an example, the most common sheet width is 36”. For a 36” sheet the overlap is 19” (half of 36”, plus 1”). In most areas, the building code allows one layer of self-adhering polymer modified bitumen sheet which complies with ASTM D1970. PABCO® recommends this self-adhering sheet wherever this is allowed by code.  You should confirm that this is allowed in your area.

The double layer of underlayment complies with code but the self-adhering sheet provides a greater margin for safety. See the PABCO® Installation Instructions for additional details and related information.

Adal home

Register to receive information

To receive professional advice and our incentive information, please enter the information below.